Q&A: Is my sewing machine broken?

Q&A: Is my sewing machine broken?

Question by : Is my sewing machine broken?
I have a Brother ES-2000 sewing machine. I’ve had it for a handful of years now. In the previous year or so, I’ve taken to sewing often. Nevertheless, each time I would sew too quickly my machine would jam,needles would break,and eventually the components would start to twist and turn out to be damaged. I’ve taken it to the repair shop three or 4 occasions. It is costing as well a lot cash. I can only sew gradually to moderately quickly or my machine malfunctions.
Also, even when I sew at a slower pace my thread Constantly bunches up. It appears so sloppy and it is driving me insane. When I’m sewing I can see the bottom of the machine coming up ever so slightly as if it is waiting to break again. Did I break the machine or can this be corrected? Also, is it just a undesirable machine to commence with?
I can not afford a new machine correct now,but I plan to save up. This time, I want to acquire anything trustworthy that won’t jam or sew messily. Anything that can really correctly execute all of the functions it comes with from speed to properly,actually sewing properly. If there are any sewers out there, can you advocate some very good quality machines? I would drastically appreciate it. Thank you!

Best answer:

Answer by kay
Your machine is 1 that I would have recycled by now, fwiw. You may possibly want to study this:
http://answers.yahoo.com/question/index?qid=20100516223306AAHNY2H

I grew up sewing on balky old machines that were not properly constructed. It makes sewing a genuine chore alternatively of something exciting. And I hate to see people fight with machines that do not perform effectively.

As far as continuing to function with it:
I did a series of images of what occurs with I did a series of pictures of what occurs with some frequent misthreadings of a
sewing machine. They are in pairs the initial pair is from a correctly threaded
machine, the rest are from the very same machine that I deliberately misthreaded.
See if you uncover a match here — red thread is in the bobbin, blue thread on
top: http://www.picturetrail.com/sfx/album/view/22521551

As far as cures:
The ten minute repair for most of what ails most sewing machines:
— Dig out the manual. Take all the thread out of/off of the
machine. Pull the needleplate and the bobbin case if it’s
removeable. Clean and oil per the manual’s recommendation. Use a
brush and vacuum, not compressed air (which blows lint in
farther), and true sewing machine oil, not three-in-1 sort oil (it
hardens and freezes the machine) nor WD-40 variety stuff (it really is a
solvent, not a lubricant).

— Put in a new needle of the correct point style for the fabric
you are sewing (ballpoint for knits, sharps for wovens) and the
proper size for the thickness of fabric (10/70 for shirting weight
fabrics, 12/80 for heavy shirtings or light pantsweight. 14/90
for medium to heavy pantsweight, 16/one hundred for very heavy fabrics.
Make confident the needle is in appropriate way around — a needle in
backwards will skip stitches or not stitch at all.

— Take a great look at the bobbin. If it really is lumpy or you spot
loops, strip off the thread and rewind. Bobbins need to be
smoothly and evenly wound. Wind at a slow, steady speed — it
assists with tension issues if the thread isn’t stretching as it’s
being wound.

— Rethread, with manual in hand. Make positive the presser foot is
UP when you thread the best — it opens the top tension so that
the thread in fact gets in between the tension disk (loops on
the bottom, not adequate tension on best).

— Fetch up the bobbin thread. You require about a 4″ tail of thread
best and bottom. Run both threads below the presser foot and
behind it.

— If you’ve been playing with the prime tension, set it to 4. If
you’ve been playing with the bobbin tension, let me know and
we’ll attempt to rebalance it, but you’re probably to have to take it
into the shop.

Now, each and every time you start to sew a seam, this is how you
do it:

1) Location the fabric beneath the needle, and use the handwheel to
reduce the needle into the fabric (be sure to turn it the proper
way… seee the manual).

2) Drop the presser foot.

three) Hold the thread tails behind the presser foot with your left
hand.

4) Take a couple of stitches

5) Drop the thread tails and sew typically.
If this does not fix your difficulties, you may possibly have some thread
caught farther in the machine than you can spot… does not take
a lot for some machines to commence pitching a fit. Or you may have
accidentally knocked the machine out of time with one particular of the
jams. Bad timing is actually a fairly rare occasion, typically preceded
by broken needles and loud noises, but a great strong jam is
another way to throw off the timing. You can verify here to see if
you feel timing is the dilemma:
or http:// tinyurl.com/ smtiming (you are going to have to
paste that back collectively) but that’s generally anything that a
repair shop demands to adjust.

Truly good habit to cultivate: anytime you sit down at the
machine for the 1st time that day, take two minutes and give it
a simple cleaning. You will save $ $ $ on repair bills and extend the
life of the machine.

Give your answer to this question under!