How to reach lower costs at CNC machining production?

Computer numerical control or CNC is the automatic working of machine tools with the help of pre programmed movements of command in computer. The cost taken in setting the computers and completing the process and expensive. And by the time a product reaches to a consumer, the cost has raised highly which can lead to fall in sales. But there are ways through which you can cut back on the cost of production.

CNC machining mass production
CNC machining mass production

Reduce machine timing – If you calculate the main work of cutting the materials takes less time but the machine continue working for a long time doing other works that does not. You need to cut out on the time that the machines spend on non value added activities like computer errors or the loading process, etc. If you reduce the time limit of machine and use it only in the cutting process it will save your electricity bill and the life of your machines. It will lead more productivity. The less time machine spends working the more profitable it will be for your pocket.

Reduction in material cost – The price of every product varies and depends on its making and availability and its demand. Different companies charge different rate on the same product. For example you need pipes in your work. One company offers you a set of pipes for 100 bucks and another branded company is offering you the same pipe but because of its brand, is charging you 300 bucks. Then it will be wiser to choose the former. But you must make your choice depending on the quality of product. If the quality and performance of expensive product is good, which the low cost product fails to provide then you should choose the good one. Low cost materials like aluminum, plastic, etc are good in long run.

Expand CNC walls – The thickness of the walls also plays an important role in your final cost. A wall with less thickness can led to increase in costs. The walls with should be 0.794mm. Remember not to make it too thin or else it won’t be able to hold up. If too thin walls are needed then you can use steel metal instead. It would be a good substitute.

Produce more of the same product– More quantity can reduce your making cost & increases effective production. If you make more of the same part the labor that goes its production will go down. If you are making multiple parts of the same product you need not change the settings, the same program will be used again and again. But remember not to over produce.

Carefully handle the parts – Material parts that are heavy requires more labor and cost. The whole process of loading and unloading them and then fixing them is tricky. And by mistake if it gets damaged then you can count it as a huge loss. It is better to buy separate parts of heavy materials and machine each one of them separately.

CNC milling company in China is the best company which can reduce the cost of cnc machining. You can contact us for 5 axis milling China factory as we provide cnc machined parts in China at lowest cost than competitors.

For more information, please check out http://www.cncmachinings.com